Waukesha Cherry-Burrell 62B Air Blow Check Valves are 'plug-style', where air pressure pushes the bonded rubber plug away from the seat.

Compact and mounted in an S-Line Clamp Connection, the 16AMP-AR relieves air/vapor pressure and is most commonly used on the inlet of a Centrifugal Pump so when the pump is operating, the valve is sealed by the low suction pressure.

For aseptic flow applications, centrifugal models are available that retain the benefits of the Waukesha Heavy-Duty Centrifugal Pump, but also include a special design feature that protects the product zone against contamination.

When the product must be isolated from the external environment, the W90 Series valve is an ideal choice. This series valve utilizes a diaphragm adapter to provide a reliable, hermetic seal around the valve stem.

A great solution for aseptic applications, this valve series utilizes a stem flush adapter to provide a liquid or steam barrier around the valve stem.

Waukesha Cherry-Burrell Ball Check Valves have a 316L stainless steel body with a curved offset ball trap. Product flow pushes the ball up into the trap and out of the product stream for full diameter flow.

Various model offerings are available to meet the processing demands for brewery mix proof applications.

Various model offerings are available to meet the processing demands for brewery mix proof applications.

Butterfly Valves offer great durability and ease of use for a wide range of services. Easy to install and maintain, butterfly valves close under pressure to form a leak-tight seal.

The Heavy Duty Metric 200 Series pump is designed for heavy-duty, high-efficiency applications. This pump provides exceptional corrosion resistance.

High Pressure 200 Series Pump comes equipped with a balanced double shaft seal and buffer fluid ports on top and bottom, which allows for complete removal of air and/or vapor from the seal chamber.

A wide range of product viscosity may be processed, limited only by the maximum 150 psig (10 bar) inlet pressure. Higher viscosity products are processed at lower flow rates to stay within the pressure limit.

Combines product recycling and shear action that can be "tuned" to produce precise effect desired.

Mix Proof valves provide safe separation of dissimilar products within the same valve body.

The Heavy-Duty Sanitary Centrifugal Pump is designed for heavy-duty, high-efficiency applications. It provides exceptional corrosion resistance.

Specifically designed for re-circulating services in a reverse osmosis system and other membrane systems.

In addition to being an excellent CIP return pump, the 200LR can run in either direction, making it possible to fill or empty tanks with the same pump.

Ball valves offer great economy and durability for a wide range of applications that do not require clean-in-place (CIP) service.

They are manually operated and simple and easy to use. Plug valves consist of a stainless steel body and a conical plug that is rotated in the body to stop or divert the flow.

A features of the manual relief valves Air Vent 40CF-AR series is that it is available in 1"-4" sizes. S-Line connections are standard.

A great feature of the 60R Series is a manually adjustable, lockable cap for setting the relief pressure.

A great feature of the W30 Series is that the body and actuator arrangement are designed for high pressure applications.

Waukesha Cherry-Burrell W45 Check Valves are "wafer-style," where product flow pushes the valve disc away from the seat.

Available in "S" Clamp (K30SA style) and Bevel Seat (30SA style).

Designed for heavy-duty and high-efficiency applications. The Metric Heavy-Duty Sanitary Centrifugal Pump provides exceptional corrosion resistance.

The W72 RS Series Mix Proof Valve features a lower radial seal for minimal spillage of products when opening or closing.

Independent lifting of both upper and lower valve seats allow CIP solution to safely flow across each seat surface and the vent area.

The Multistage High-Pressure Centrifugal Pump is specifically designed for re-circulating service in reverse osmosis and other membrane systems.

The W70 Series Mix Proof Valves for products containing large particulates.

W75CP PMO Mix Proof Valves are for safe separation of product from CIP plus single seat-lift separation compliance.

W75 for safe separation of product from CIP plus single seat-lift separation compliance.

W75RS for safe separation of product from CIP plus single seat-lift separation compliance.

W75CP for safe separation of product from CIP plus single seat-lift separation compliance.

Specifically designed to pump "unpumpable" products, such as dough, meat emulsion, puddings and cheese, that cause bridging and cavitation in conventional pumps.

The Votator 4 x 120 is a unique concentric scraped surface heat exchanger designed for heating and cooling moderately viscous products.

The Votator Extra Heavy Duty units are designed for heating and cooling products with viscosities in the 1,000,000 centipoise range.

All systems rely on the unique efficiency of Votator® Scraped Surface Heat Exchangers in achieving quick, consistent production of crystal nuclei.

The Votator II incorporates the most popular features of the Thermutator and Votator lines, making it extremely easy to maintain.

The Self-Priming Centrifugal Pump is not only an excellent CIP return pump, but the 200LR can run in either direction. This makes it possible to fill or empty tanks using the same pump.

A choice of modularly interchangeable stators and rotors makes it versatile for processing a wide variety of products.

Mix Proof valves provide safe separation of dissimilar products within the same valve body.

Users of manually operated valves can rely on a full complement in Waukesha Cherry-Burrell's line.

WCB's Non-Slamming design prevents water hammer or hydraulic shock conditions caused by traditional flow diversion valves, extending the life of the valve and surrounding process equipment.

The Adjustable-Spring actuator lets you set the desired relief cracking pressure right at the valve by simply turning the adjustment screw (see below).

A modular family of "throttling or pressure control" valves that are the ultimate in: easy cleaning, high pressure, low maintenance design.

A modular family of "throttling or pressure control" valves that are the ultimate in: easy cleaning, high pressure, low maintenance design. With 11 standard bodies, 12 different actuators, 4 stem types, flush or standard adaptor, and a wide range of control tops, the valves can be configured to precisely fit any application.

A modular family of valves that are the ultimate in: easy cleaning, high pressure, low maintenance design. With 16 standard bodies, 12 different actuators, 5 stem types, and a wide range of control tops, the valves can be configured to precisely fit any application.

With 16 standard bodies, 12 different actuators, 5 stem types and a wide range of control tops, the valves can be configured to precisely fit any application.

The W72RS Series Mix proof Tank Outlet Valve features a vessel side radial seal for minimum spillage operation when opening or closing.

Waukesha Cherry-Burrell's traditional "Can-Do Pump." Versatile in application, its reliability has made it the industry standard worldwide for more than 50 years.

The Universal Lobe Pumps were specifically designed for a different challenge: lower cost and CIP (clean in place) applications.

Although this pump is designed for high purity, pyrogen-free fluid, used in pharmaceutical products, this pump is ideal for pumping high purity, deionized water.

Adapted from the rugged precision of the 200 Series designed for pumping water for injection.

Waukesha Cherry-Burrel Featured Products Offered: