This simple instrument allows you to easily measure magnetic strength without any hassle. A new gaussmeter makes HACCP (Hazard Analysis Critical Control Points) compliance a snap. Place the probe at the maximum magnetism and read the meter. IT’S THAT EASY! It comes with everything you need: instructions, viewing paper that allows you to quickly locate the area of maximum magnetism, a replaceable 9V battery and a 48” flexible probe.

BEECO's all stainless steel, bullet-shaped, magnetic separators are designed for pneumatic or gravity flow conveying lines where metal trash is best separated from product flow by tapered poles created by a bullet-shaped cartridge. Powerful, rare-earth, neodymium magnets capture and hold iron, steel, or nickel trash and stainless steel shear until cartridge is removed and cleaned.

BEECO's duct magnets are designed for mechanical or gravity fed processing systems where metal trash from nuts, bolts, and miscellaneous hardware to stainless steel fines as small as 0.0001 inches can be captured from product flow by magnetic tube, grid, or plate circuits powered by rare-earth, neodymium magnets.

BEECO's grate magnets are designed for mechanical or gravity fed processing systems where metal trash from nuts, bolts, and miscellaneous hardware to stainless steel fines as small as 0.0001 inches can be captured from product flow by magnetic grids of powerful neodymium rare-earth magnets.

BEECO's plate magnets are designed for use above or below conveyors or similar applications where powerful, rare-earth neodymium magnets in one to five pole circuit configurations remove and capture metal trash as small as 0.0001 inches from free-flowing product lines.

MagTraps are North America's popular brand of magnetic separators for liquids, slurries, and pumped chunky products.  These powerful magnetic line traps are available in more than 30 off-the-shelf models and an unlimited number of custom configurations when manufactured to customer specifications.

A rugged, sanitary float valve which combines quick disassembly/assembl y with easy cleaning. Sanitary finish both inside and out allows the valve to be fully submerged. The balanced plug with O-ring seals provides positive sealing. It can withstand inlet pressures up to 60 psi. It handles 100 gallons per minute at 60 psi.

Sanitary, non-adjustable low pressure relief valve for liquid and air service. It features a large flow capacity with light accumulation. The opening relief pressure is set at the factory, according to customer’s need, between 2 and 20 PSI. Simple rugged design for positive closure, easy take-apart, cleaning and reassembly.

A spring loaded, self-setting, self-actuating sanitary pressure relief valve that is preset and actuated solely and directly by the upstream static line pressure. It combinesquick and easy cleaning and assembly with low blowdown and accumulation. 

A compact, quick acting, sanitary vacuum breaker for eliminating air from processing lines. It offers two-way passage of air flow until the line is pressurized, then the plug rises and closes the valve. When depressurized, the plug drops, which allows air back into the system draining the line of liquid.

A sanitary tank vacuum relief valve providing quick action, large flow and minimal accumulation. The non-adjustable low vacuum relief setting is closed under pressure, atmospheric pressure, or partial vacuum. It opens at specified low degree of vacuum and continues to open with increasing vacuum.

These valves work reliably when used in milk processing lines. Milk fats serve as lubricants for the valves. For products not containing natural lubricants, approved lubricants may be used. If using a QVVO valve, try teflon coated Buna-N or Viton O-rings.